Minimal Wallet

This is my attempt at making a minimal and modern wallet inspired by the Ridge Wallet. To put it together follow these instructions:

1. find an elastic material around 1/2 an inch wide and around 5-6inches in length depending on how stretchy the material is.

2. Sew the material to make a loop that fits snug around one of the inner wallet pieces

3. Find another piece around 1/2in wide and 2 inches in length and sew it to opposite sides of the loop, when the piece lays flat it should make a T shape.

4. Take the two inner pieces and line up the semi-circle cut out with the grooves facing outwards.

5. Put the piece of elastic around the 2 inner pieces. The elastic should fit into the grooves facing outwards.

6. Use super glue to glue the outer pieces onto either side to cover up the grooves.

7. Put a wide rubber band on the outside of the wallet to use as a cash strap

If you have any questions as to how to assemble this feel free to leave a comment or send me a message!

Print Settings

Printer Brand:

Anet

Printer:

A8

Rafts:

Doesn't Matter

Supports:

No

Resolution:

.2

Infill:

85%

Notes:

You will need to print:

1x inner ridge wallet.stl

1x inner ridge wallet - Copy.stl

2x outter ridge wallet.stl

Post-Printing