Beyblade 'Sustain' Driver kit

Stance-system offers an assortment of drivers, each with a different height, along with replaceable performance tips, to optimize a Beyblade to the blader's needs.  This kit also includes most of the parts to build the remainder of the driver assembly.

  Week 3 includes the Sustain drivers.  These drivers are designed with a free spinning ring under the Beyblade, improving “Life after death”, while keeping a narrow silhouette.

   In addition, 5 Performance Tips have been added.  A tip has been created to fulfill every role (Attack/Defense/Stamina/Balance), along with a bonus tip (Strange).  One last Blank has been added, so that anyone can make their own performance tip.
 

Fabrication:
PLA works reliably for printing parts. Any material that is sturdy (PTEG/PLA+/ABS) and can be printed in detail should work, and is recommended.

Most parts should be made with 100% infill, and ideally with as much detail as possible.  All of these parts were made using a 0.4mm nozzle.

M2 6&4mm screw will be needed to assemble the final product, along with a spring.  Glue may be recommended used on some part you don't intend to disassemble later, but tips should require no glue, screws, or tools.