Printer Bed Edge clips

SImple Easy to print Printer bed edge clips with build in M3 3mmx4mm heat insert holes

recommended you do it in a material other then PLA highly recommend ABS and higher but PETG will work.

no supports needed just a heat insert and a M3 12mm bolt to help hold it on though they are already pretty snug.

9.4mm for Bed/Magnet Sheet/Glass/PEI

8.6mm for Bed/Magnet Sheet/Glass

7mm for Bed/Glass

5mm for Bed/Magnet Sheet/PEI

Gcode:

G170 Starting Print

G1 Z2.0 F3000 ; Move Z Axis up little to prevent scratching of Heat Bed

G1 X0.1 Y30 Z0.3 F5000.0 ; Move to start position

G170 Draw Line on Y

G1 X0.1 Y200.0 Z0.3 F1500.0 E15 ; Draw the first line

G1 X0.4 Y200.0 Z0.3 F5000.0 ; Move to side a little

G1 X0.4 Y30 Z0.3 F1500.0 E30 ; Draw the second line

G92 E0 ; Reset Extruder

G1 Z2.0 F3000 ; Move Z Axis up little to prevent scratching of Heat Bed

G1 X5 Y30 Z0.3 F5000.0 ; Move over to prevent blob squish