Wolverine sharpening jig - modular Vee arm spacer system

Establishing the distance of the Vee arm is important for reproduciblity when using the OneWay Wolverine sharpening system as it establishes the grind angle of your gouges. This solution allows you to clamp 3D printed spacers directly to the arm itself, so there is no need to have separate wooden blocks that can get dropped or lost. Importantly, the system is modular so you print as many spacers as you need, and when the distance needs to be changed, you simply rotate the spacers and slide the Vee arm in/out.

The design uses 5 mm threaded rod. Holes in the anchor piece allow tapping M3 holes in rod to hold the anchor securely.