Deep Cup Bird Feeder

Feed the birds not the rats.

If the birds are getting through the seed at a rate of knots, and a lot of the seed is ending up on the ground. This is the bird feeder for you. Inspired by the many feeders around, I designed this deep cup feeder to stop!, well OK “Slow down” the amount of seed being flicked on the ground by our feathered friends. Also, there is a swing out hanger so you can stand the bottle upright when filling, and a rain shield to keep the seed tray dry. The hanger and rain shield are scalable, so will fit any size soda bottle. Although they are primarily designed for a two-liter bottle. The seed feeder is not scalable, but will fit any size soda bottle. You can also use any other seed feeder with the hanger and rain shield if you wish.

Print Settings

Printer Brand:

Creality

Printer:

Ender 5

Resolution:

.2

Filament:

Creality PETG or PLA

Black

Notes:

Material
I have used PETG with a .4 Nozzle. It is far more resilient to sun light than PLA. But if that’s all you have, give it a go. I will include the CURA setting I use for PETG if it helps. There is also a sizing ring included so you can check you have the right fit on your bottle for the rain shield. All the info you need is in the readme file.

Category: Outdoor & Garden