IoT Ping Pong LED Lamp

This LED lamp is a quick project that can be done within a day. Only a few cheap components are needed to create a nice looking ambient lamp. No programming is needed, only the WLED firmware is uploaded to a micro controller via a simple tool. A 3D-Printed version simplifies the build process a lot but the cardboard version is also quickly made and can be made huge in size. WLED is open source and provides many IoT interfaced including a web front end and an app that allows to control all the lamps in the local WIFI.

Big thanks to bitluni to share these files on https://www.thingiverse.com/thing:4595868/files. 

Find the assambly instructions online on https://bitluni.net/pingponglamp and on youtube 

To finish this you have some parts to be prepared (the usual diy IoT stuff ;) )

Parts needed:
RGB LED Strip 
RGBW Strip 
Ping Pong Balls 
ESP32 Mini KIT 
WAGO Nuts
AC to DC PSU with Barrel Jack
5.5mm Barrel Jack 

There are  affiliate links on his website which help support bitluni's channel.