Lightsaber stand with LEDs

Lightsaber stand with LEDs: I made this for fun and for myself, but noticed many would like to have it. So with these…
24
43
1
619
updated July 21, 2022

Description

PDF

Lightsaber stand with LEDs:

I made this for fun and for myself, but noticed many would like to have it. So with these files you can replicate it.

See it in action: YouTube video

Please do upload your own makes to show off and tag me/credit me if you use it anywhere else! I look very much forward to your prints/versions!

For the LEDs, these are the versions I used:

12 LEDs ring

24 LEDs ring

40 LEDs ring

for the saber holder you need LED strips, 10mm max in width: Example

and remote so you can change the LED sequences

(you can of course source them somewhere else as long as the dimensions are the same)

Note: Oleg@4K made a better remix of my base (on MyMiniFactory) of the saber stand to fit the LEDs easier- I added it in the files under remix.

Suggestions:

You can print every part without support, except for the saber holder - unless you use a resin printer, then the support you need is minimal and the result much nicer. But I have successfully printed all parts in PLA.

For the diffuser disc and the plate.stl, use transparent PETG. They are meant to cover up the LEDs and I highly suggest you do not skip that part - it makes the stand look much better, otherwise you see exposed LEDs.

I painted the Star Wars logo silver, but you can do as you like and I think it would look very nice if it was done with a separate extruder/color.

Print Settings

Printer:

Qidi X-CF Pro

Rafts:

No

Supports:

No

Resolution:

0.2

Infill:

20%

Filament:

any PLA PLA

black


Notes:

You need to use support for the saber holder part (top) or a resin printer. Everything else prints without support.

Category: Electronics

Tags



Model origin

The author marked this model as their own original creation. Imported from Thingiverse.

License