Print in Place SUV

3D MODEL DESCRIPTION

Inspired by the print in place cars made by @vit.budina and @clockspring3d (check them out on Instagram or Printables, they are awesome), I decided to make one myself. The result is this SUV looking thing, and now you can print it too.

Good luck printing it, and have fun with it:)

3D PRINTING SETTINGS

Filament: PLA 1.75mm wide
Nozzle: 0.4mm
Nozzle temp: 210c
Bed temp: 50c
Layer Height: 0.18mm
Print time: around 2h
Support: No support needed

Printer: FlashForge Adventurer 3

https://www.youtube.com/watch?v=i-7Lb8zcVII