This is an Engine Stand extension for the Ford FlatHead V8 (https://www.thingiverse.com/thing:2537602).
The mounting holes are already present on the engine block.
The video of the finished project : https://www.youtube.com/watch?v=vm-Y2X2z7cA
Print Settings
1 x EngineStandBackLeft : Layer:0.15mm Raft:no Brim:no Support:no Infill:20%
1 x EngineStandBackLeftSpacer : Layer:0.15mm Raft:no Brim:no Support:no Infill:100%
1 x EngineStandBackRight : Layer:0.15mm Raft:no Brim:no Support:no Infill:20%
1 x EngineStandBackRightSpacer : Layer:0.15mm Raft:no Brim:no Support:no Infill:100%
1 x EngineStandBottom : Layer:0.15mm Raft:no Brim:no Support:no Infill:20%
1 x EngineStandClasp : Layer:0.15mm Raft:no Brim:no Support:no Infill:20%
1 x EngineStandFrontLeft : Layer:0.15mm Raft:no Brim:no Support:no Infill:20%
1 x EngineStandFrontRight : Layer:0.15mm Raft:no Brim:no Support:no Infill:20%
1 x EngineStandLogo : Layer:0.15mm Raft:no Brim:no Support:no Infill:20%
1 x EngineStandLogoSupport : Layer:0.15mm Raft:no Brim:no Support:no Infill:20%
Accessories
14 x m3 threaded insert
2 x m2x5mm SHCS
18 x m3x8mm SHCS
2 x m3x30mm SHCS
10 x m3 washer
2 x m3 jam nut
1 x electric wire (~20cm)
1 x variable speed controller : https://www.amazon.fr/gp/product/B07MPWGF7P/ref=ppx\_yo\_dt\_b\_asin\_title\_o08\_s00?ie=UTF8&psc=1
2 x DC female panel mount jack : https://www.amazon.fr/gp/product/B07QPZTHDK/ref=ppx\_yo\_dt\_b\_asin\_title\_o00\_s00?ie=UTF8&psc=1
Look at pictures.
https://www.printables.com/fr/model/690204-ford-flathead-v8-engine-complete-package-of-paid-a
The author marked this model as their own original creation. Imported from Thingiverse.