Bobbing Flying Saucer

This is a flying saucer bobble head toy. This toy uses a 3D printed base and spring and has a recess in the base that will hold a 10mm magnet.  There are two halves to the saucer and you will need to glue them together.  

Supports are only needed on the top half and minimal infill is needed.

The spring and base used with this are courtesy of the excellent bobble head collection by 3d-printy (https://www.thingiverse.com/thing:5409630.  The tool to install the spring in the saucer is included here and its use is optional, but handy.

Enjoy!