Core & Tray for 1.2L ASRock a300 and x300 case (DeskNano x300 compatible)

The 1.2L Replacement case for DeskMini x300.  Basic “slots” styled core that's compatible with the whole DeskNano x300 system.  This core fits most coolers, but doesn't fit Wraith Stealth. 

See if you can print this first, since the other parts are very easy.

If you like this, consider supporting the project by getting the design pack for $6 in my store which has a perfect fitting AMD Wraith Stealth version, and other more beautiful designs.  I also sell 16mm switches customized to fit the case.

For extra thermal performance you can experiment with printing the Tray with the Mesh technique (set Top & Bottom layer height = 0,  20% infill,  and 2mm wall thickness).  It will be less rigid,  but turn it into a breathable mesh.

Parts list:

-16mm switch (shorty switch recommended)

-8x M3 screws (wood or self tapping type recommended, but machine will work too)

-5x M3 Threaded Inserts for the Tray (optional - for expansion modules)

------------------------------------

For more info & instructions see the DIY guide on this page:
https://smallformfactor.net/forum/threads/desknano-x300-a-1-2l-replacement-for-the-deskmini-a300-x300.17605/

Rest of the DeskNano Collection:

https://www.printables.com/social/301085-msystems/collections/228727

This work is licensed under a Creative Commons (4.0 International License) Attribution-NonCommercial No Sharing without Attribution, or Commercial Use.