Raspberry Pi 3.5 TFT LCD touch screen holder is mounted into 2x 5.25 drive bay. USB cable could be wired to 10 pin USB port on motherboard or to back USB port. Holder was designed for Zalman Z5 case, but it should fit to any computer drive bay (holder size is 149 mm x 86 mm).
Raspberry Pi is running on MoBro image.
BoM:
Rafts:
No
Supports:
No
Resolution:
0.3
Infill:
40%
Filament: PM PLA, ABS or PETG black
Category: ComputerThe author marked this model as their own original creation. Imported from Thingiverse.