Double LCD drawer Ender 3 / Pro

Double drawer with tray/s hidden under LCD panel suitable for Ender 3 and Pro.

Bottom drawer can fit things up to 32.5 mm high and 124.5 long, with optional one or two trays (these are identical). Mount it with four M3x6 bolts and T-nuts.

If you miss T-nuts you can print adapters for M3 nuts: https://www.thingiverse.com/thing:3050607

If you need a regular drawer: https://www.thingiverse.com/thing:3664764

Print settings:

• Filament: PETG, PLA
• Layer Height:0.3
• Line Width:0.6 (all parts have walls of 1.2 mm thickness)
• Wall Line Count:1
• Top/Bottom Layers:2
• Fill Gaps Between Walls:Nowhere
• Flow: 105-110% (a bit more than usual to increase adjacent lines adhesion)
• Infill:0%
• Temperature:+5..15 to regular temp due to thick and wide lines

Check out my other designs: https://www.thingiverse.com/DaVinci2000/designs