Flashlight/torch bezel openers - Noctigon KR4/KR1, Emisar DW4, Emisar D1(v2), JetBeam RRT-01, Nitecore EC4(S), FireFlies SS AA

This is a set of different tools to help flashlight bezel removal.

I recommend to print them with PETG or ABS/ASA with 5 to 8 perimeters and 0,1 mm layer height.

This is a growing collection, so feel free to check back later for tools for other makes and models of flashlights.

Currently available for the following lights:

• Emisar DW4 (for both front and switch rings, 2 styles),
• Emisar D1(v2) switch ring (2 styles),
• JetBeam RRT-01 bezel,
• Nitecore EC4(S) bezel
• FireFlies Stainless Steel AA switch ring (experimental, based on measurements sent to me)
• Noctigon KR4/KR1 switch ring
• TLF/BLF Lumintop FWxx series switch ring (for FW3A, FW3C, FW3T, FW1A, FW1A Pro…)