D-Ring for bags

My sister likes to sew and often bags. The problem is, that even cheap D-rings with no design often costs way to much and those costs add up. So I've opened Fusion 360, created a simple version of it, and printed it in PETG.
Sister was happy with the design but was concerned about the carrying capacity. So I quickly filled a watering can with 10 liters of water, grabbed a thin rope, connected the things together and lifted it without problems. There was no deformation. 10kg without problems - that was okay for her ;-)

2022/02/24: Fusion 360 file added.

Print instructions

Resolution: 0.15mm
Infill: 50%
Rafts and support: No: