merci. très joli et cela fonctionne bien avec mon AMS
PolyTerra Spool Flange
PolyTerra filament spool flange to improve stability for put on (not put through) filament spool holders.
39
428
8
1555
updated July 16, 2022
Makes
Comments
It has some problems unloading when the ams is fully closed, but works perfectly fine otherwise
Works fine on my polyterra cardboard spools. The holes don’t line up perfectly for filament holding but one on each side does so it’s good enough
Works great for me in the Bambu AMS. No issues. If it hits the top lid don't fully latch the cover and you should be fine.
Unfortunately not usable for the Bambu Lab AMS system, since the spool becomes too large and hits the top of the lid, so that the rollers can't move the spool.
Still a nice design, easy to print, which fits perfectly the Polyterra spools. (edited)
@Pyroplan89_448011 Use https://www.printables.com/model/401970-ams-lid-lifter-with-lock and then you can use all the 205-210mm spools that are slightly too large for the stock AMS.
Works for Overture and EconoFil(99% scale) (edited)