Voron Design Cube V7 (with a spin… literally)

I found myself spinning the cube on my fingers with the bearing holes so I added a shaft to it! I've also loaded a split model for people who wish to print in multi-material/multi-color.

The cube is printed with Voron standards.

• .2mm layers
• forced .4mm line width
• 40% infill (I prefer gyroid)
• 5 top/bottom layers
• abs filament

original cube model:

https://github.com/VoronDesign/Voron-Extras/blob/main/Test_Prints/Voron_Design_Cube_v7.stl