Iphone Bike Mount (with Otterbox Case)

Bike Mount for Cell phone, with an Otterbox case.
40
316
2
2317
updated February 27, 2020

Description

PDF

Bike Mount for Cell phone, with an Otterbox case.

The cradle is designed to fit the goose neck of a bike without having to remove the Otterbox case. All side switches on the phone can still be accessed as well as the headphone / charging port while in use.

The side walls of the cradle can be modified if you are using a different case and per phone size. (Thicken or thin depending on your case and phone type) This specific STL file is designed to fit an Iphone 10X with Otterbox case.

If the the mount is too big for the goose neck of the bike, you can use foam tape to spread out the clamps a bit. Adding tape can also help of the cradle slides. (In my case - I used a piece of Ninja Flex filament 2" wide that matches the circumference of the goose neck for added grip - but duct tape or electrical tape will work just the same)

Print instructions

Can use PLA or ABS. - 33 % infill recommended.
No support structure is required. (Print cradle upside down)
Print two "Clamp" STL files.
(One for right side of clamp / one for left side)

The clamp is designed to use a heated thread insert sized for a .250/ 10-32 thread. (a 10/32 nut & screw will work if you do not have thread inserts)

Reference thread insert PN# (McMaster-Carr #94459A340)
https://www.mcmaster.com/94459a340

Screw lengths are 1.5" for the clamp and 3/4" for the screw at the neck of the cradle.

Enjoy!

Tags



Model origin

The author hasn't provided the model origin yet.

License


Highlighted models from creator

View more