A simple 'guard' for a little cactus whose only viable sunny spot in the room was on the window sill by a window seat. Since I was afraid of poking myself by accident while sitting around there, I put together this little situational thingy that has a very low chance of being applicable to anyone else! :)
Measurements:
The depth of the window sill is 126mm
The radius at the bottom of my cactus's pot is 65mm.
The radius at the top of my cactus's pot is ~110mm
Some Notes:
• If you do want to make/alter this for yourself, I suggest printing with the 'front' side down in order to make the front as smooth as possible. However, this will require the use of longer supports (see final image).
• I recommend using clear PETG with concentric infill makes the front pretty appealing. Could be a nice play to put stickers on too!
• Maybe the front walls could've been a little higher, but I'm happy enough with the results to where I'm not sure it'd be worth reprinting the whole thing unless more needed to be altered
Printer Brand:
Prusa
Printer:
I3 MK3S
Rafts:
No
Supports:
Yes
Resolution:
0.3mm
Filament:
Overture PETGClear
Category: HouseholdThe author marked this model as their own original creation. Imported from Thingiverse.