Beyerdynamic DT 770/880/990 Slider Replacement with Logo and L/R Indicators

Works perfect for me :) Thanks

Just needed to replace the broken left one.
Probably should have printed on a smooth plate, but what's done is done. Works well!

Nice model! Fits perfectly and is easy to print

Works and looks great.

0.4mm nozzle
Inland Glass Orange PLA
15% infill gyroid

Prints easily and fits perfectly

Printed in PLA with a .4mm nozzle at .1mm layer height. Mechanism works great.

Might add color accents later since I now know that it works great as a replacement. (edited)

I printed the right piece in PLA using a 0.12 mm layer height, and using a really slow speed (5 mm/s) for the first layer in order to ensure that the details could be replicated. I was printed really fina with a 0.4 mm nozzle and the result is really appealing.
I hope PLA will make the job done, otherwise I will print it in ABS/ASA.
Thanks!

Nice print, thanks for sharing! I think it came out with great detail even with the default 0.4mm nozzle.