Alps / Space Invader / MX switch pusher

These are little tools to remove switches from mechanical keyboards plates. The shell goes over the switch bottom housing and pushes on the little retaining clips, the slider goes in the shell to push on the switch and release it from the plate. This lowers the possibility of breaking the retaining clips, and also is much faster than using screwdrivers to push on them.

The MX version is untested for now.

Printed in PLA at 0.15mm resolution, 80% infill. 

Modeled with a gap of 0.15mm between parts, you might need to tweak your printer to get a good fit.