1.5" ABS Pipe Clamp

I recently had to make a set for an event my sisters work was putting one. For part of it, they wanted some led boxes that they could spin around. The cheapest/easiest thing was to use coroplast plastic for the box and pvc pipe for the rod. They wanted the pipes black and since I didn't want to paint them I ended up getting the black abs pipes the store sells. In order to keep the box up but still be able to spin I made these pipe clamps that they can hand tighten with a M5 nut and bolt. It ended up working out really well.

Print Settings

Printer Brand:

Creality

Printer:

Ender 3

Rafts:

No

Supports:

No

Resolution:

.3

Infill:

20%

Filament: Amz3d PLA Black