HextrudORT ERCF Mod For Mantis Toolhead

Want to use Mantis Toolhead:

https://github.com/VoronDesign/VoronUsers/tree/master/printer_mods/Long/Mantis_Dual_5015

on my V2 with ERCF:

https://github.com/EtteGit/EnragedRabbitProject

and HextrudORT extruder:

https://github.com/VzBoT3D/VzBoT-Vz330/tree/master/Assemblies%20BOM%20and%20STL/Vz-HextrudORT

So this extruder mod Vzbot's hextrudORT with ERCF

• Need: 2x M3x12 SHCS 
• BMG parts
• Material: ABS or PACF recommended
• Layer height: 0.2mm
• Infill: 40%
• Perimeter: 4
• Top/Bottom Layer: 5
• Support: Needed
•