Tesla Model 3/S/X Wheel Center Cap

Wheel center caps for the Tesla Model 3. Snap right into the stock 18" wheels, once you take the aero covers off.

The test cap --- the one with the hole in the middle --- is so you can easily remove the cap without taking off the wheel. That way you can print one to check the calibration of your printer and make any scale adjustments if necessary.

Print Settings

Printer Brand:

Rostock

Printer:

Rostock MAX V2

Notes:

If you print the raised logo version, print with the tab-side down, using supports and a raft. This way the top of the wheel cover gets a nice 3d surface finish.

If you print the inset logo version, you can print with the logo-side down and get a smooth finish.