Raspberry Pi 3B+ Fan Case for Prusa MK3S (Rotated) [Fusion 360 source]

Modification of https://www.printables.com/model/74422-raspberry-pi-3b-heatsink-case-for-prusa-mk3s-rotat with 30x30 fan mount added.

M3x10 screws were used (and painted black with marker) + M3 nuts to mount fan.

If your fan has low height you can put it inside of case (like on photo).

Fan wires can be routed under the fan or thru small slot on the one cover side.

Top case mount holes were also made bigger than in original.

Printed with 40% infill.

Fusion 360 and step files attached, so you can easily change fan cover size and other things.

There is also “Pi_Case_Fan_Cover” file. Fan cover is optional. I'm using it on non prusa printer. It was made for 30x30x15 SUNON MC30151V2-000U-A99. This is 12V fan connected to 5V (4 pin) and GND (6 pin) on raspberry pi 3. Using 12V fan makes it very silent and still doing its cooling job. Note: 15mm fan is way to high to use on Prusa MK3 (Z-motor will collide with fan).

Added fan.