Stand Alone Main Control Case modifications

Modified some parts of this design to suit my needs. most mods are to accommodate SSR for 120v bed.

Body: Removed the support pillar. print with supports in the appropriate places.

Base: Moved and added a second power switch for SSR. Added hole for a breaker button for SSR.

Shelf: Made a shelf that will accommodate a relay and buck converter used in pi setup. Shelf has ramp to lower section of case to allow for better air flow from fan to SSR heatsink.

Bottom level fans: Shorted the fan casing as much as possible and added a hat that the SSR heatsink can slide onto.

Shelf fans: Made a shelf that will hold three fans to blow air across the relay, buck and SSR.

SSR Heatsink: https://www.amazon.com/gp/product/B08ZCYBPTV/ref=ppx_yo_dt_b_search_asin_title?ie=UTF8&psc=1

Power Switches: https://www.amazon.com/gp/product/B083NP3ZKC/ref=ppx_yo_dt_b_search_asin_title?ie=UTF8&psc=1

Breaker: https://www.amazon.com/gp/product/B08RBLZF9L/ref=ppx_yo_dt_b_search_asin_title?ie=UTF8&th=1