A cradle to hold your Heinrichs Weikamp OSTC4 while it is charging from the wireless charger. The cradle can also be used to store the charger cable when not in use.
The mount for the wireless charger is slightly off center to have the charger position aligned with the position of the charging coil inside the dive computer. The longer of the vertical arms is meant to go towards the rounded edge with the 'OSTC' label on it.
Update (23 Oct 2022): I've updated the design with less room for the dive computer to move around, in order to keep it in the right spot for the charger to work at the fastest speed, instead of taking > 10 hours for a charge. I've also added an opening to the bottom of the cavity for the charger, to improve cooling.
Update (17 Apr 2023): Based on a discussion in the Heinrichs Weikamp forums showing that cooling of the dive computer helps with faster charging I have added a version of the cradle that allows mounting of a 60mm fan next to the dive computer. This setup reduces the time for a full charge to a few hours. Suitable fans can be obtained for cheap from electronics suppliers or AliExpress, and they are available in 5V with an USB plug, so all that is needed for charging is an USB power supply with two outputs.
Category: Sport & Outdoors
The author marked this model as their own original creation. Imported from Thingiverse.