Voron V0 3.5" RPi Touch screen mount

Since I really like the KlipperScreen on my other printers I made a mount for a smaller screen for the V0.

Here are the docs for the Klipperscreen. 

https://klipperscreen.readthedocs.io/en/latest/Hardware/

Just as reference. I ordert this screen: 

https://www.amazon.de/dp/B01JRUH0CY?ref=ppx_pop_mob_ap_share

As for hardware I used standard “Voron stuff”

2x M3 heatset

2x M3x6 BHCS

4x M2x5 Self Tapping Screws for Plastic (you can use the Voron BOM 10mm screws and cut them with some side cutters)

Print settings I used also Voron recommended but since it's not structual is doesn't really matter.