Custom (and yet another) temperature control/calibration test.
Printer Brand:
Prusa
Printer:
Prusa Steel
Rafts:
Doesn't Matter
Supports:
No
Resolution:
.25
Notes:
It was thinked to be printed at 0.2 resolution (every 50 layers you change the temperature)
But it can also be printed at 0.25 (like in this case) but every 40 layers you change the temp.
it could also be printed at 0.1 or less but i dont think it's really needed...
No need for top or bottom, and 1 wall is enough.
Why this one? why make another one?
I didn't like to print a square, because it was too many unnesessary walls...
a circle could have been a good idea, but i wouldn't be able to see how temp affected sharp edges. so I decided to do this "oval" shape.
It has some "lines" so you get a very specific mark and you dont need to mark them afterwards.
It's shape, allows it to be print at really fast speeds too.
(ignore the random dots in mine, that was because i was testing random retraction points too)
Category: 3D Printing TestsThe author marked this model as their own original creation. Imported from Thingiverse.