Small Parts Bin Compatible with the Ryobi Link System [Prototype]

Prototype working model of a small parts bin which can be used to expand the organization of the Ryobi Link system.
81
340
2
1718
updated June 30, 2022

Description

PDF

Description

Still a prototype design but usable enough to upload so others can get use out of it. Designed to be compatible with the Ryobi Link storage system. Feet on the bottom of the bucket are designed to interface with the recessed diamond pattern inside the Link containers to stop the buckets from sliding around. Please let me know of any feedback or updates you'd like to see to a final version of this system.

Print Instructions

Model prints mostly without any issue using any setup you prefer to use though the model has been optimized to print at a 0.3mm layer height with a 0.4mm nozzle. A 0.6mm layer height with a 0.8mm nozzle should also work without issue though this is currently untested by myself. If you are printing the feet, you'll need to add supports to the bottom of the bucket. I've attached my CURA settings below to help anyone who may need it. As you can see in the pictures the very bottommost layer of the bucket is some what rough, however that is completely unnoticeable once the bucket is sitting in the storage container.

Useable Support Settings [Not Final]

Attribution

Please print and re-mix this model as much as you want. Please do not use this model for commercial use.

Tags



Model origin

The author hasn't provided the model origin yet.

License