This should work with phones ≤83mm wide. 2 mounting points for portrait or landscape.
Print: .28 layer height and 15 walls. No top/bottom layers, infill or supports.
What you need: flat head 2" machine screw ¼ -20 , 4 nuts, and glue.
Match the bottom nut thread to your tripod post.
Assembly:
press 3 nuts into the base
thread the screw into the top nut
snap the jaw onto the head of the screw
glue a nut on the end of the screw leaving 5mm of exposed threads
glue the handle onto the nut
Now channel your inner Ansel Adams…
The author marked this model as their own original creation.