Simple Bottle Dryer

I Could not find a bottle dryer that fitted my needs, so I created one.

The plan was to make a simple universal dryer, for all the different bottles we have.
The first one was a bit to small for heavy (glass) bottles, but fit smaller plastic ones perfectly.
So I also made a larger one, which even fits 750ml Bicyle bottles.

On the bottom, there is a small reservoir to prevent water from running over the kitchen top.

I suggest printing it in PETG, so you can throw them in the dishwasher if needed.
I also think it is easier to get PETG watertight without the need for epoxy or anything.

I included ready to print gcode files for 0.4 mm and 0.6 mm nozzles.
The small version uses around 30grams and the large one 50 grams of material.
I used a large layer height, since detail is not important.

Update 04/08/2022

I made a version that holds 2 bottles at once.
I also made this one a bit wider, for more stability.