This is a vesa mount adapter for the Samsung curved monitors. It utilises the existing mounting part that comes with the monitor - this needs to be disassembled (see below)
Parts Required
4 x M4 5/5.5mm threaded inserts
4 x M4 screws (mine came with the vesa mount)
To print:
Print part on the flat (I used PLA but other filaments would be suitable)
Install M4 threaded inserts
To install:
Remove the existing base from the monitor
Reveal screws by peeling back the felt
Unscrew the metal plate and retain the metal plate and screws and plastic part
Discard the base and white plastic insert
Insert printed part into the plastic part and screw on the metal plate with the original screws