Press Fit Pulley Extractor for Nema 17

Tool for extracting press fit drive pulleys from Nema 17 stepper motor (5mm shaft) with M5 nut and screw.

407

1769

updated September 6, 2022

Description

This model is inspired by Jake_of_all_Trades Pulley Extractor (https://www.thingiverse.com/thing:3593964) but with changes:

fillets added (for removing failure point when using excessive force)
chamfer added (removed sharp edges for better grip)
made slimmer for faster printing
two versions with difference being bottom distance - the gap distance between pulley and motor cover when extracting (3.75mm and 5.25mm; see screenshot attached)

The author remixed this model.

by Jake_of_all_Trades (thingiverse.com)