Designed as an organizer for a collection of too many pens and markers, but maybe useful for other non-pen related tasks. There are two tiers with an elevated second section to ensure all pens are at a similar level. The upper level is deeper on the x axis which results in two different sized dividers. The divided sections can break each level into a max of six compartments.
Tested at 40% - 100% scale. The parts slide with slight resistance.
Printer Brand:
Prusa
Printer:
I3 MK3S
Rafts:
Doesn't Matter
Supports:
No
Notes:
I printed the dividers vertically with a raft. If your printer can support the dividers horizontally with adequate supports, you will likely have an easier time as printing the dividers vertically can be challenging.
Category: OfficeThe author marked this model as their own original creation. Imported from Thingiverse.