This is a lathe spindle spider to hold long pieces of work on the outboard end of the spindle. Threads onto a 34mm x 1.5 spindle. You will need (4) 8mm x 1.25 bolts and nuts. The spindle spider is threaded for the 34mm x 1.5 but only has (4) 6.5 holes for the 8mm bolts. You will need to drill holes to 6.8mm and tap. Note: Area 5mm around the (4) holes is a solid infill to allow for the drilling and taping.
Printer: MK3s, Filament: Inland PETG Red.
The author marked this model as their own original creation.