LM2596 with LED Display Mount

Hello there,

I built this mount from scratch, but I was inspired by this one: https://www.thingiverse.com/thing:4514331

I used M3 screws and M3 inserts. I wrote on transparent tape, which fans are regulated and placed it in the matching rectangle. I glued the whole assemply onto the printer with double sided tape.

For printing:

0.3mm layer height

3 perimeters

20% infill

Print Settings

Printer Brand:

Creality

Printer:

Ender 3

Rafts:

No

Supports:

No

Resolution:

0.3mm layer height

Infill:

20%

Filament: / PLA white