An ecosystem of Rocket Planters, allowing you to pick and choose various components to achieve the desired look.
6h 3m
5× print file
0.20 mm
0.40 mm
55.00 g
In the contest Plant Pots
75
115
3
867
updated June 19, 2022

Description

PDF

This is a rocket plant pot! This model is easy to print, requiring no supports. All variants of the rocket include a window (hole). In our case, this hole was not big enough for soil to fall out of, however, you may choose to cover this whole (from the inside) using some clear sticky tape, or a plastic bag (thin plastic packaging works great too!). We have included pre-sliced files for the versions with/without hinges, a pre-sliced file for the nosecone(cap) as well as a pre-sliced multi material file, for those wanting to print this model with various colours. As previously mentioned, the rocket planter is in essence an ecosystem, meaning you can pick and match various files. The combinations you can choose from are:

Main Body (Hinge) MK3S+ MK3S 0.2mm --- Cap MK3S+ MK3S 0.2mm

Multi Material Main Body MK3S+ MMUS2 0.2mm --- Cap MK3S+ MK3S 0.2mm

Main Body (No Hinge) MK3S+ MK3S 0.2mm

For the hinged variants, we recommend using a piece of filament to attach the cap and main body together. All models were sliced in Prusaslicer using Prusa's 0.2mm Quality setting. The sliced files are for the MK3S+ or MK3S

We have also included the stl files, if you would like to slice the models yourselves.

The combinations include:

Main Body (Hinge) + Cap

Main Body (No Hinge)

In regards to slicing these files, we used a 0.15mm layer height at 10% infill. You could certainly jump up to 0.2mm layer height (or higher), which would result in a faster print time without a noticeable decrease in quality. Walls should be set to 2.

The remaining meshes are for multi material printing. Please note, if you do choose to print the multi material meshes, we highly encourage you to also print the cap piece, and then join it to the multi material body as discussed earlier (using a piece of filament).

 

All these collections can be found segregated into folders down below.

 

All models contain drainage holes.

 

Tags



Model origin

The author hasn't provided the model origin yet.

License