I have Munchkin: Critical Role on order, so am doing the usual game pimping. As their logo is hexagonal, the OP dice tray would fit beautifully. I resized the tray down as only 1 dice needs be rolled at a time.
The Critical Role logo is by OblivionStar at https://www.thingiverse.com/thing:3253600 and I used Tinkercad to delete out the hoop and resize the logo to fit. There were some errors appearing in the slicer when I exported the single model, so I used the slicer to make the logo a part of the dice tray STL and joined the 2 together within the PrusaSlicer.
This design has the logo embossed on the dice tray low enough not to cock any dice rolls and lead to arguments/rerolls.
Ran it off on the SWX1 at 0.20mm and took about 3 hours.
Update 10 May: I added the etched version, making the logo into a hole in Tinkercad and pushing that a small amount (1-2mm) into the dice tray. Takes 4 hours to print.
No breach of IP intended as this is non-commercial and for the fun of the game.
Printer:
Artillery Sidewinder X1 (0.4mm nozzle)
Rafts:
Yes
Supports:
No
Resolution:
0.2
Infill:
25%
Filament:
Technology Outlet PLAMilitary Khaki
Notes:
My workspace runs cold and I am back using rafts and glue-sticks for the moment. If adhesion is good for you, ignore the raft.
Dimensions approx X = 100mm, Y = 88mm, Z = 16mm Category: Toy & Game AccessoriesThe author marked this model as their own original creation. Imported from Thingiverse.