The Pot is designed to fit planters with a diameter of 100 mm and a hight of 100 mm. The outside size is about 175 mm wide and 140 mm tall. Feel free to scale it up or down to fit your plant size.
I printed it on the Prusaslicer “PLA 0.20 speed” preset. I changed the Infill to 5% to make the print time a little shorter. The Pot is placed upside down, to minimize overhangs. In this orientation the slicer still shows a few overhangs, but they printed perfect for me. You can check my settings in the 3mf file.
The material used was Extrudr Greentec Pearl. My wife did the paintjob with acrylic paint.
The author marked this model as their own original creation.