Double life (or anything) counter for table-top games (angeled or adjusted for visibility)

Allows to join two life counters together.

Check the original model this remix is based on for more information, this one contains only the different files.

Files to print (original, angeled version):

Life_Counter_V1.00-middlepart.stl
From original: 2x Life_Counter_V1.00-sides.stl (only the one with the hole completely through, 1x normal, 1x flipped)
From original: 2x Life_Counter_V1.00-tube.stl
From original: 2x Life_Counter_V1.00-clip.stl
From original: 6x Life_Counter_V1.00-one_ring.stl
From original: 6x Life_Counter_V1.00-one_spring.stl

Files to print (adjusted for visibility):

Life_Counter_V1.00-visiblity-middlepart.stl
From original: 2x Life_Counter_V1.00-visiblity-sides.stl (only the one with the hole completely through, 1x normal, 1x flipped)
From original: 2x Life_Counter_V1.00-tube.stl
From original: 2x Life_Counter_V1.00-clip.stl
From original: 6x Life_Counter_V1.00-one_ring.stl
From original: 6x Life_Counter_V1.00-one_spring.stl

Printed in PLA with 0.2mm layer height.