Customizable Container with Knurled Lid

Containers are so useful - I got a lot of them. Here is my container with a knurled lid and cylindrical jar.

Use the Customizer to create a proper container for your needs, it is fully parameterized.

Instructions

I printed containers in PLA without support.

The smaller ones with 0.2mm layer and the 50mm one with 0.3 layer for faster printing. All fits perfect.

Depend on your printer you may need to use brim.

Due to OpenSCAD command line interface I have now generated and uploaded the container with 20, 25, 30, 40, 50, 60, 75mm diameter each in 5 sizes with all lid styles.

I used this parameters:
wallthickness=2.0
backlash=0.5
Except the one with 75mm diameter, where I used
wallthickness=2.5
backlash=0.625