Modular system mount for pi camera v2 with fisheye lens IMX219

assembly instructions for the modular system on the creator's page https://www.thingiverse.com/thing:1079807

you'll need

one m3x25mm bolt and nut (or 20mm without nut) to secure the camera mount and the cover

two m5 Tnuts and bolts to attach the mount to the frame

Edit 04/15

repositioned the pin in the front cover and different cut out in the back cover for a better fit of the pi camera

added photo of the camera in place

this is a link for the lens if you're interested , I am not affiliate in any way https://www.amazon.com/Waveshare-IMX219-Camera-Official-Raspberry/dp/B07H2D4WYR?ref_=ast_sto_dp https://www.aliexpress.com/i/32918557288.html

Print Settings

Rafts:

Doesn't Matter

Supports:

No

Resolution:

0.2

Filament: