Slide duplicator for Canon lens with a reverse ring.
It can transfert 24x36mm slides on a 50x50mm frame.
I use it on my Canon 50mm f/1.8 EF lens.
For the assembly, you'll need:
- 6 M3x8 bolts + nuts
- 1 or 2 M3x10 bolts + female threaded inserts M3x5x4
- a reverse ring (google: reverse ring or reverse mount with the filter's diameter of your lens)
Setup:
- make sure the tube slides: insert the larger in the thinner until they slide smoothly.
- fasten all the parts together with the M3x6 bolts/nuts (alternatively you can glue them)
- fix the duplicator on your lens
- insert a slide
- make the focus (I use the scratches as reference)
- block the position with the M3x10 bolt
Tips:
- use an uniform white light . I use a cheap soft box.
- I shot using exposure bracketing so I can choose the best exposition.
Print Settings
Supports:
Doesn't Matter but I don't use support. it can be painful to remove on the slide holder.
Resolution:
0.2mm
Infill:
20%
Filament: Various PLA
Notes:
Support are optional. Printing with a 0.6mm extruder was ok for me.
Tags
The author marked this model as their own original creation.