Minion Tim multicolor

Minion Tim has arrived to join his tribe and (in his mind at least) watch over them like a father figure

He joins:

Kevin: https://www.thingiverse.com/thing:4713479

Bob: https://www.thingiverse.com/thing:4722509

Stuart: https://www.thingiverse.com/thing:4729619

Supports on model will be needed only for the neck.

Each part is already oriented as it should be printed.

This is a multi part model that is friction fit. Simply print each piece and push them together.

There is one section that works best assembled in a certain order:

Put all the eye pieces into the goggles

Place goggle into the band.

Place this to the skull with the flat side of the bridge towards the skull. The wider part of the skull touches the goggles.

Place the upper key through the goggle and band combination and into skull.

Assembling the rest is straight forward. You can see the hat is tilted, make sure you keep track of which side is down. As you place them on the upper key make sure they are titled as shown.

If you read this far, you probably like this model, so do me a favor and scroll up and hit the like button.

If you make him or any of the other Minions, please come back and post your make!

Print Settings

Printer Brand:

Creality

Printer:

CR-10

Rafts:

No

Supports:

Yes

Resolution:

0.12

Infill:

Various

Filament: Various PLA+ Various

Notes:

Supports will be needed on the neck where the mustache goes in.