Audi A3 8P trunk cover joint

These parts were designed based on the original components.

Joints:

• You will need 2pcs M4x45mm screws and M4 nuts to make the joint stronger. It's workign since 3 months without problem.
• You have to mirror the model on the short edge if you need one for both sides. Easy to do in Cura.

Balls:

• The balls are cut by half, you can use shoe stripes and glue it in them.
• You can glue a bearing ball inside to make it heavier.

Patents:

• I've printed them on the side to get all the curves

My parts were printed of HT-PLA, we'll see how it can survive a hot summer.