Triple Mechanical Keyboard Stand

Simple 4 piece mechanical keyboard stand used to showcase 3 keyboards.

Assembly

Print two links and two side then assemble them together, each part should fit snugly but do not require huge amount of force to do so. If the pieces do not fit together, scaling the z-height of each piece in your slicer will make them fit more easily.

Printing

You should be able to print all pieces flat side down at once on a 20x20 build plate. The model can be printed cleanly using a 0.3mm layer height and 20% infill in any solid material.

• Raft: no
• Supports: no
• Layer Height: 0.3mm
• Infill: 20%