5/8"-27 Dual Cold Shoe Mount Microphone Adapter

Adapter block that screws onto the end of a boom pole or any other standard microphone mount with 5/8"-27 threads. It gives you two cold shoe mounts.

It's useful to mount equipment such as microphones and recorders that were designed to mount onto a DSLR's hot shoe. Two mounts allows you to have both the microphone and the recorder at the end of the pole bypassing the need for a long audio extension cable.

The shoe mount slot is slightly wider to allow any orientation (in 90-degree increments) to give the greatest flexibility to position your microphone.

Fusion 360 Design File Included!

Hope it's useful!

Print Settings

Printer Brand:

Creality

Printer:

CR-10

Rafts:

No

Supports:

No

Resolution:

0.1mm

Infill:

20%

Filament: Any PETG

Notes:

FDM Print Orientation: Print with the hole opening up to avoid any overhangs or bridging.

Printing at 0.1mm layer height seems good enough for the 27 TPI thread pitch on my print. YMMV

Post-Printing

On the Print Bed -- Just after printing

Screws onto my boom pole just fine

Mounting my Rode VideoMic and my Zoom H1 recorder -- Didn't need to break out my long audio cable

How I Designed This

Fusion 360 File Included!

Category: Hobby