Magnetic puzzle (Fridge magnet)
Available as 3x4 frame and 4x5 frame. The Parts are the same.
Tested with 0.1mm PLA but should also work with 0.2mm
To ensure the frame and puzzle parts are prinbtable, I sliced them each in 3 slices that can later be reassembled with pins (and maybe some additional glue.)
Inbetween slices there are a 3gaps for 1x5mm magnets that can be integrated during assembly.
A puzzle picture can be glued on the parts, one the Pussle is assembled.
Following:
I will later upload a template with cutting marks.
I will publish a Version with extruded numbers from 1-12/1-20 in the parts
The author hasn't provided the model origin yet.