Cable Chain Bracket for use with my Neptune 2 Z-Axis Cable Management Cover

I wanted to clean up the Z-axis wires on my Neptune 2S, they've touched the table and lead screw during a print before. This cable chain bracket needs M4 t-slot nuts. I use it together with a 10mm x 11mm  (W x H) inner 17.5mm x 15mm (W x H) outer cable chain. Sorry I used a salvaged chain so don't have my own print file.

Used with this cable cover: https://www.printables.com/model/219959

Printed well in PLA+ with these settings:

2 walls

0.2mm layer height

10% infill

A little bit of support for the slots and area above the filament detector

Here is a video if you want to relax and watch it assembled to some laid back music: